BHMA A156.2-2011
BHMA A156.2-2011
Bored and Preassembled Locks and Latches
standard published 07/22/2011 by Builders Hardware Manufacturers Association
Categories
- ASME BPVC 2019
- ANSI
- ASME
- ASME BPVC
- API
- ASTM
- SAE
- BS
- 2019
- 2020
- 9000
- AASHTO
- AATCC
- ABMA
- ACC
- ACI
- ARINC
- AS
- ASA
- ASD-STAN
- ASQ
- AWS
- AWWA
- B11
- BHMA
- CAN/CGSB
- CAN/ULC
- CECC
- CGA
- CIE
- CII
- CISPR
- DOXPUB
- DS
- ETSI
- ETST
- EU
- EURO
- FCI
- GMW
- GPA
- HI
- IEC
- IEEE
- IES
- ISO
- JIS
- MSS
- NCSL
- NETA
- New Standards
- NSF
- PIP
- RICA
- RTCA DO
- SMACNA
- TIA
- TMS
- USP
- UTS
- VDI
Full Description
1. SCOPE
1.1 This Standard establishes performance requirements for bored and preassembled locks andlatches, and includes cycle tests, strength tests, operational tests, security tests, material evaluationtests, finish tests, and dimensional criteria.
1.2 Tests described in this Standard are performed under laboratory conditions. In actual usage,results vary because of installation, door and frame construction, maintenance and environmentalconditions.
1.3 Grade Qualifications Manufacturers shall indicate the Grade level of their locks. Locks shall meet all tests for their grade listing. A Grade 1 lock shall meet all Grade 1 criteria, a Grade 2 lock shall meet allGrade 2 criteria, and a Grade 3 lock shall meet all Grade 3 criteria.
This item is available as part of a discounted standards set covering Door Locks.
Cart
(empty)
New products
- Advances in Information Storage Systems: Volume 5
- Intelligent Engineering Systems Through Artificial Neural Networks: Volume 3
- Journal of Dynamic Systems Measurement and Control Special 50th Anniversary Issue
- 1993 Piping Engineering and Operation
- ASME Y14.5M-1994 (R2004)
- ASME B5.50-1994 (R2003)
- Report On Vitrification Of Residue(Ash) From Municipal Waste Combustion Systems
- ASME B5.10-1994 (R2013)
- ASME B107.9M-1994 [ Withdrawn ]
- ASME B30.14-1996
- ASME Y14.8M-1996 (R2008)
- Intelligent Engineering Systems Through Artificial Neural Networks: Volume 6
- ASME Y14.35M-1997 (R2008)
- ASME B29.10M-1997 (R2019)
- ASME PTC 12.3-1997 (R2019)
- ASME PTC 19.11-1997 (R2004)
- ASME B107.42M-1997 (R2004)
- ASME B1.5-1997 (R2014)
- ASME A112.6.1M-1997 (R2017)
- ASME NQA-1-1997
- ASME PTC 12.2-1998
- ASME B18.6.4-1998 (R2005)
- ASME B18.6.2-1998 (R2010)
- The Virtual Engineer: 21st Century Product Development
- Total Quality Development A Step by Step Guide to World Class Concurrent Engineering (Soft Cover)
