SAE AMS 5524L

This specification covers a corrosion and heat resistant steel in the form of sheet, strip, and plate.These products have been used typically for parts requiring both corrosion and heat resistance up to 1600 mDF (871 mDC), but usage is not limited to such applications. At elevated temperatures, strength of this steel is slightly higher than, and oxidation resistance is similar to, that of 18-8 type steels.Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; SAE ARP 1110 recommends practices to minimize such conditions.



Keywords: AMS5524

People Who Bought This Also Bought:
SAE AMS 5529H- Steel, Corrosion Resistant, Sheet and Strip 17Cr 7.1Ni 1.1Al Solution Heat Treated and Cold Rolled, Precipitation Hardenable 0.0015 to 0.050 Inch (0.038 to 1.27 mm) Nominal ThicknessSAE AMS 5902C- Steel, Corrosion Resistant, Sheet and Strip 18Cr 8Ni (SAE 30301) Cold Rolled 3/4 Hard, 175 ksi (1207 MPa) Tensile StrengthASTM E18-08b- Standard Test Methods for Rockwell Hardness of Metallic Materials SAE AMS 5901C- Steel, Corrosion Resistant, Sheet, Strip, and Plate 18Cr 8Ni (SAE 30301) Solution Heat TreatedSAE AMS 5510S- Steel, Corrosion and Heat Resistant, Sheet, Strip, and Plate 18Cr 10.5Ni 0.40Ti (SAE 30321) Solution Heat Treated