SAE AMS 6414K

This specification covers a premium aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.These products have been typically used for parts requiring through-hardening capability up to 3.5 inches (89 mm) in nominal thickness and subject to rigid magnetic particle inspection standards, but usage is not limited to such applications.Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking after heat treatment; SAE ARP 1110 recommends practices to minimize such conditions.



Keywords: AMS6414

This product replaced by:SAE AMS 6414L - Steel, Bars, Forgings, and Tubing 0.80Cr 1.8Ni 0.25Mo (0.38-0.43C) (SAE 4340) Vacuum Consumable Electrode Remelted

Browse Product Family:

SAE AMS 6414L
SAE AMS 6414K

People Who Bought This Also Bought:
SAE AMS 6415S- Steel, Bars, Forgings, and Tubing 0.80Cr 1.8Ni 0.25Mo (0.38 0.43C) (SAE 4340)SAE AMS 6484C- Steel, Bars, Forgings, and Tubing 0.80Cr 1.8Ni 0.25Mo (0.38 - 0.43C) SAE 4340 Normalized and TemperedBS EN 13001-1:2004- Crane safety. General design. General principles and requirementsSAE AMS 6409C- Steel, Bars, Forgings, and Tubing 0.80Cr 1.8Ni 0.25Mo (0.38-0.43C) (SAE) 4340) Special Aircraft Quality Cleanliness, Normalized and TemperedSAE J 1249- Former SAE Standard and Former SAE Ex-SteelsSAE J 1397- Estimated Mechanical Properties and Machinability of Steel BarsSAE J 404- Chemical Compositions of SAE Alloy Steels