SAE AMS 5529J

This specification covers a corrosion-resistant steel in the form of sheet and strip 0.0015 to 0.100 inch (0.038 to 2.54 mm) in nominal thickness.These products have been used typically for parts such as springs requiring corrosion resistance and high strength up to 600 mDF (316 mDC), but usage is not limited to such applications.Strength of these cold-worked products will be impaired if parts require welding during fabrication.Certain design and processing procedures may causes these products to become subject to stress-corrosion cracking; SAE ARP 1110 recommends practices to minimize such conditions.

This product replaces:SAE AMS 5529H - Steel, Corrosion Resistant, Sheet and Strip 17Cr 7.1Ni 1.1Al Solution Heat Treated and Cold Rolled, Precipitation Hardenable 0.0015 to 0.050 Inch (0.038 to 1.27 mm) Nominal Thickness