LV-11-C006 -- Proportional-Integral-Plus (PIP) Control System for Individual Thermal Zones in a Small Ventilated

One of the main goals of ventilation is to create a favorable thermal condition inside a compartment. The efficiency of a ventilation system to achieve this goal depends on many factors such as: air flow rate, incoming air temperature, air flow pattern etc. For this purpose, there is need for a control system which can provide proper inlet conditions resulting the required output at a specific location. The main objective of this paper is to examine the possibility to control the temperature in a ventilated chamber in different spatial regions individually. Twenty two-dimensional spatially fixed and equal square cells in a small ventilated test chamber (0.70x0.65x0.4 m; 27.56x25.60x15.75) were used. Step inputs in ventilation rate and inlet air temperature are applied and temperature responses at 30 sensor locations are recorded. First order transfer function data-based models are identified for modeling the dynamic behavior of temperature in each of the 20 cells. A Proportional-Integral-Plus PIP control system is designed based on the identified models to control the temperature in each of the 20 cells individually.

Citation: ASHRAE Transactions, Volume 117, Part 1, Las Vegas, NV



Product Code(s): D-LV-11-C006