AWWA C520-10
AWWA C520-10 Knife Gate Valve, Sizes 2 in. (50 MM) through 92 in. (2,400 MM)
standard by American Water Works Association, 10/01/2010
Full Description
This standard describes bonneted, bonnetless and one- and two-piece fabricated stainless-steel and cast ductile-iron body knife gate valves with resilient or metal seats, including tapping knife gate valves, for use in water, wastewater, and reclaimed water systems with pH range from 6 to 12 and a temperature range from 33F to 125F (0.6C to 52C). The minimum design pressure shall be 150 psig (1,034 kPa) for nominal sizes 2 in. to 24 in. (50 mm-600 mm), and the minimum design pressure for nominal sizes 30 in. to 96 in. minimum (750 mm-2,400 mm) shall be 25 psig (172 kPa), 75 psig (517 kPa), and 150 psig (1,034 kPa).Cart
(empty)
New products
- BS PD ISO/TS 7127:2023
- BS PD ISO/TS 9491-1:2023
- BS PD IEC TS 62898-3-4:2023
- BS PD ISO/TS 24665:2023
- BS PD ISO/TR 14644-21:2023
- BS PD ISO/IEC TS 30105-9:2023
- BS PD ISO/IEC TS 27560:2023
- BS 8636:2023
- BS PD ISO/TR 9839:2023
- BS PD IEC TR 63222-100:2023
- BS PD ISO/TR 37178:2023
- BS PD IEC TS 62998-3:2023
- BS PD IEC TS 61496-5:2023
- BS PD ISO/TR 15377:2023
- BS PD IEC TR 63415:2023
- BS PD ISO/IEC TR 7052:2023
- BS PD CLC/TS 50600-5-1:2023
- BS PD IEC TS 61400-30:2023
- BS PD ISO/TS 11686:2023
- BS PD CEN/TS 17959:2023
- BS PD ISO/PAS 24644-1:2023
- BS PD ISO/TR 9464:2023
- BS PD ISO/PAS 18940-1:2023
- BS PD ISO/TR 12770:2023
- BS PD IEC TS 62915:2023
